22"-55" Tilting Bracket (YW-T015-1)

TILTING MOUNTS

Model No. : YW-T015-1


1)Material: SPCC with coating finished

2)Suggest TV size: 22"-55"

3)Max load of TV mount: 50kg

4)VESA of TV mount: 400x400mm

Tilting range: 0° up and 15° down

6)Distance to the wall: 55mm

7)Integrated bubble levvel keep your mounts accurate

8)Color available: Black

  TILTING MOUNTS

Model No. : YW-T015-1


1)Material: SPCC with coating finished

2)Suggest TV size: 22"-55"

3)Max load of TV mount: 50kg

4)VESA of TV mount: 400x400mm

Tilting range: 0° up and 15° down

6)Distance to the wall: 55mm

7)Integrated bubble levvel keep your mounts accurate

8)Color available: Black

 

Component Mounting And Soldering.The final step is to mount and solder the components. Both THT and SMT components are placed on the PCB by machines. THT components are most often soldered in an automated process called 'Wave Soldering'. This enables all components to be soldered simultaneously. Their legs are first cut near the board and slightly bent over to keep the component in place. The PCB is then moved over a wave of liquid flux, such that the bottom side strikes the flux. This removes any oxide from the metal surfaces. After heating the PCB it is similarly moved over a wave of melted solder. The solder attaches to the solder pads and component legs, and the soldering is complete.

Component Mounting

Component Mounting,Custom Component Mounting,Metal Component Mounting,Mount Bracket Component

Orilind Limited Company , http://www.orilind.com