From the recent lecture on low-carbon lighting technology in Hebei city, it is learned that in order to promote low-carbon lighting, Hebei Province will use the electricity consumption of lighting last year as the base. This year, the energy saving rate of urban lighting in Hebei Province should reach 10% or more, and the lighting efficiency should be 80. The application rate of high-efficiency energy-saving lamps above % is over 85%, and Shijiazhuang will reach over 90%.
Low-carbon lighting is the development and deepening of green lighting in response to global climate change. This year is the decisive battle for the “three-year change†of the urban landscape in Hebei Province. The urban rectification and landscape construction have been fully carried out. Under such circumstances, it is particularly necessary to promote low-carbon lighting and advocate low-emission, low-pollution, low-energy, resource-saving lighting systems and lighting methods.
The implementation of low-carbon lighting, planning and design is the leader, must be in the framework of the city's overall planning, scientifically do a good job in urban lighting development planning, to determine the actual urban lighting positioning and development goals. In 2008, all districts and cities in Hebei Province have completed the preparation of special plans for urban lighting. At the end of this year, all county-level cities have to complete the preparation of special plans for urban lighting. At the end of this year, all districts and cities in the province will fully complete and apply the functionally advanced and technologically advanced urban lighting centralized control management system to improve the overall lighting effect, reduce urban lighting energy consumption, and provide people with a high-quality lighting environment.
Permanent magnet Dc Motor is composed of stator magnetic pole, rotor, brush, case and so on. Stator magnetic pole is made of permanent magnet (permanent magnet steel), ferrite, alnico, ndfeb and other materials, and the rotor is generally made of silicon steel laminated. Enameled wire is wound between two slots in the rotor core (three slots are provided with three windings), and its joints are separately welded on the metal sheet of the commutator. Electric brush is a conductive part connecting power supply and rotor winding. Permanent magnet motor brush USES single metal sheet or metallic graphite brush, electrochemical graphite brush.Permanent Magnet Gear Motor is established using permanent magnet magnetic field of a dc motor. Permanent magnet Gear Motor is widely used in various kinds of portable electronic equipment or apparatus
precision instruments and meters,automobile industry, medical equipment, consumer electronics, household appliances, electric glass doors and Windows,etc., wide application range,,Permanent Magnet Gear Motor is usually used in small power occasion.
Features: permanent
magnet gear motor is a kind of rectangular pulse wave, sine wave current, in the form of hybrid permanent magnet motor. Simple structure, high reliability and high efficiency.
Method of use: the best stable in horizontal plane, installed on the permanent magnet gear motor output shaft parts, cannot use a hammer to knock,knock prone to press into the permanent magnet gear motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
permanent magnet gear motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a geared motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
permanent magnet gear motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of permanent magnet gear motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.
Permanent Magnet Gear Motor,Permanent Magnet Motor With Gear,Permanent Magnet Gear Motor 5V,Permanent Magnet Stepper Gear Motor
Shenzhen Shunchang Motor Co., LTD. , http://www.scgearmotor.com