AUO may only produce entry-level AMOLED panels in 2013

According to industry sources, AU Optronics (AUO) originally planned to begin mass production of small-sized AMOLED panels by the end of the first quarter of 2013, but due to factors such as capacity and cost, the small-sized AMOLED panels produced by AUO may only reach a resolution of 126ppi rate.

Due to these problems, AUO may only be able to produce AMOLED panels for entry-level and mid-range mobile phones in the first quarter and even the whole year of 2013, while higher-spec small-size AMOLED panels are expected to be taken over by Korean panel makers.

The source also pointed out that Innolux also encountered the same problems as AU Optronics in the mass production of small-size AMOLED panels.

Managed Industrial Switches

The task of the managed switch is to keep all network resources in good condition. The network management switch product provides a variety of network management methods based on the terminal control port (Console), based on the Web page, and supports Telnet to remotely log in to the network. Therefore, network administrators can perform local or remote real-time monitoring of the switch's working status and network running status, and manage the working status and working mode of all switch ports in a global view.

The switch is the most important network connection device of the LAN, and the management of the LAN mostly involves the management of the switch.
The network management switch supports the SNMP protocol. The SNMP protocol consists of a set of simple network communication specifications, which can complete all basic network management tasks, has a small demand for network resources, and has some security mechanisms. The working mechanism of the SNMP protocol is very simple, mainly through various types of messages, namely PDU (protocol data unit) to achieve the exchange of network information.

There are also managed switches that provide policy-based QoS (Quality of service). Policy refers to the rules that control the behavior of the switch. The network administrator uses the policy to allocate bandwidth and priority for application flows and control network access. The focus is on the bandwidth management strategy required by the service level agreement and the way of publishing the policy to the switch. Multifunction light emitting diodes (LEDs) used to indicate port status, half duplex/full duplex and 10BaseT/100BaseT at each port of the switch, and switch status LEDs that indicate system, redundant power supply (RPS) and bandwidth utilization A comprehensive and convenient visual management system has been formed.

1U Industrial Switch,L3 Ethernet Switches,24 Port Managed Switch,Managed Industrial Switches

Shenzhen Scodeno Technology Co.,Ltd , https://www.scodenonet.com

Posted on