Huawei's Wyatt Box Cracked Cannot Enter the Sofa Desktop Solution

After cracking and rebooting your Huawei Box, you might find it difficult to access the third-party desktop. As shown below:
Actually, there’s a trick here. Once you crack the package, it includes an ES File Explorer, which gets automatically installed after the process is complete. Then, plug in a USB drive and boot into the box normally. You’ll see a prompt asking if you want to open the ES File Explorer — just click "OK."
Once inside the ES File Explorer, look for the “home” or “app” icon and tap it to enter the app section.
Find the “Apply” option and click to open it.
After the crack, you should see a “Sofa Manager.” Open the Sofa Butler, go to “My Applications,” then “System Applications,” and launch the Sofa Desktop.
If the Sofa Butler doesn’t show up, go to “User Installed Applications” and check the arrow next to it to switch to “System Applications.” Look for any Sofa-related software. If it exists, switch to the Sofa Desktop from there.
Then press the remote control’s “Home” button. A default desktop selection will pop up. Choose the Sofa Desktop and click “Don’t remind me again.”

VFD Grid

Vacuum fluorescent display, referred to as VFD, is a low-energy electroluminescent display devices, the working principle and CRT similar. It has the incomparable advantage of liquid crystal display (LCD) in applications where there is a large variation in ambient brightness and no strict requirement for low power consumption, and is now widely used in audio-visual equipment, home electronics, automotive instruments, office equipment and instrumentation.

The structure of a VFD board is a typical vacuum triode structure, consisting of a cathode, a grid and an anode. In between the cathode and the anode there's a thin mesh of metal called the Grid that can be switched on or off, controlling the flow of electrons from the cathode to the anode. This VFD grid mesh is made of a thin metal plate with a thickness of 30 to 50μm, which is lithographed and made into a highly transparent fine lattice or tortoise-shaped metal mesh. When a positive voltage is applied to the grid, electrons emitted from the filament are accelerated and diffused toward the anode. When a negative voltage is applied to the grid, electron flow to the anode is cut off.

We custom VFD Grid with drawings provided by customers. The raw material we use for etched VFD Grid is SUS430 stainless steel. We are equipped with professional metal etching equipment and exposure development equipment. Our etched manufacturing capacity can achieve 0.05mm.

Vacuum Fluorescent Display Grid,VFD Grid,Custom VFD Grid,Etched VFD Grid,VFD Grid Mesh

SHAOXING HUALI ELECTRONICS CO., LTD. , https://www.cnsxhuali.com