Precautions for Isdeto System Card Opening

Hong Kong Tianlang TV officially launched on January 7th, it uses the Irdeto2 (Aidide 2) encryption system. Although we have encrypted Irdeto2

The system is not unfamiliar, but there are not many friends who have experienced card opening. If a friend wants to open the Tianlang Card today, please pay attention to the following matters (guaranteed that the card will be opened immediately):
The general principles of Kaitian Langka:

It must be done that the receiving system is normal, the power is turned on, and E16 appears on the TV screen. Immediately notify the card opening, and the card will be ready immediately! !

1. Due to the provisions of Irdeto2 encryption system on card opening authorization, the smart card must be inserted into the receiver when the Tianlang card is opened, and the receiver is turned on to receive

The state of the Tianlang program signal! ! Because Irdeto2's card opening authorization signal is received in the authorization center through the SMS or online way to open the card

Immediately after the message, the card opening authorization signal is issued to the card to be opened, and the next authorization signal will not be sent until 90 minutes.
Note: Tianlang Satellite TV's card opening authorization signal will send an authorization signal to the card within a period of 90 minutes within 20 days of receiving the card opening information.

2. The receiver should use the Irdeto system receiver. Most of the receivers that originally received CBTV and the current 4 * 0 series Viaccess + Irdeto version of the machine are both

Can be used on Hong Kong Tianlang TV. However, the important point here is that the 430 series receivers, the Nagar (146 pumpkin) system is generally turned on by default, please users

Switch it to V + I version. If the customer still does not understand what is the V + I version, then ask them to switch the system to the state when watching 76.5 !!

3. Information codes of Irdeto encryption system:
The biggest difference between Irdeto and other systems is that it has an information code that will appear on the TV screen. We can arrange it according to the information code that appears

In addition to the corresponding question !! The commonly used code is as follows:
E04 Please insert smart card
E04 Please insert a smart card

E05 Unknown card
E05 Smart card error

E16 Service is currently scrambled
E16 program is scrambling

If E04 appears, please insert the smart card of Tianlang Satellite TV into the receiver;
If E05 appears, please check whether the smart card is inserted reversely, whether the receiver system is on the Irdeto system or the card is damaged;
There are two situations when E16 appears: 1. It is a new card and is waiting for authorization to open the card. Notice the authorization to open the card and you can see the program immediately! ! 2. Not watched for a long time, the card

No authorization instruction received. Just notify the authorization and give the card the next signal! !

What are the Gateway Brands in the Technology Zone? _Top Ten Gateway Brand Rankings Introduction to Default Gateway How to fill in the default gateway How are the default gateway settings derived? There are several methods? How to set it up? What is the use of the default gateway

Follow WeChat

Interesting and informative information and technical dry goods

Download Audiophile APP

Create your own personal electronic circle

Follow the audiophile class

Lock the latest course activities and technical live broadcast
Collect People collection
share it:
comment
Publish

related suggestion

Working principle and precautions of float level switch

Published on 2018-03-23 ​​10:36 • 315 times read
Working principle and precautions of float level switch
Matters needing attention in choosing metal tube float flowmeter

Published on 2018-03-19 15:25 • 160 views
Matters needing attention in choosing metal tube float flowmeter
"Top Ten" Precautions for Infrared Thermal Imager

Published on 2018-03-19 09:36 • 252 times read
"Top Ten" Precautions for Infrared Thermal Imager
Precautions for proper use of relays

Published on 2018-03-12 09:14 • 330 views
Precautions for proper use of relays
Precautions for wiring operation of magnetic flap level gauge

Published on 2018-03-09 11:01 • 353 times read
Precautions for wiring operation of magnetic flap level gauge
MOS tube main parameters and precautions for use (excerpt)

Posted at 2018-03-06 17:12 • 921 views
MOS tube main parameters and precautions for use (excerpt)
Precautions for using high-power wireless output radio

Published on 2018-03-05 11:46 • 886 views
Precautions for using high-power wireless output radio
Matters needing attention in the operation and use of magnetic flap level gauge / magnetic float level gauge

Published on 2018-03-01 12:47 • 260 views
Matters needing attention in the operation and use of magnetic flap level gauge / magnetic float level gauge
Some matters needing attention in the selection of electromagnetic flowmeter

Published on 2018-02-24 13:01 • 305 views
Some matters needing attention in the selection of electromagnetic flowmeter
Precautions for installation of two-in-one lightning protector

Published on 2018-02-22 15:10 • 594 views
Precautions for installation of two-in-one lightning protector
Take you to understand why driving noise is so loud? How to prevent and repair ...

Many people may feel this way. When they are in someone else's car, they feel very quiet. Some cars have a lot of noise inside, which makes people uncomfortable. ...

Published on 2017-07-28 10:14 • 177 times read
Take you to understand why driving noise is so loud? How to prevent and repair ...
Is the car wash always clean? Teach you to do it in ten minutes, open new every day ...

I can often hear complaints from the car owners and friends around me. They are often cars that have just been washed in the morning. As long as I drive out and come back, it will be dirty at noon or afternoon ...

Published on 2017-07-27 09:39 • 391 times read
Is the car wash always clean? Teach you to do it in ten minutes, open new every day ...
What should I know about buying a car? Teach you how to build a new car with a new configuration

With the rapid development of the automobile manufacturing industry, there are more and more configurations on automobiles. Some high-end black technologies (such as HUD head-up display, gesture control system ...

Published on 2017-07-23 10:58 • 228 times read
What should I know about buying a car? Teach you how to build a new car with a new configuration
How did the car smell come from? Teach you how to quickly remove the car ...

As summer arrives, the odor in the car seems to start to become heavier, the space in the car is narrow, and the unpleasant smell will make it difficult for the driver to concentrate and affect normal ...

Published on 2017-07-20 16:41 • 427 views
How did the car smell come from? Teach you how to quickly remove the car ...
In the hot summer day, the fuel consumption of the new car is getting higher and higher! Teach you how to reduce ...

Many car owners will find that in the process of using their car, although the car is getting more and more familiar, the fuel consumption is getting higher and higher, which greatly increases the cost of car maintenance. originally...

Published on 2017-07-19 14:49 • 205 times read
In the hot summer day, the fuel consumption of the new car is getting higher and higher! Teach you how to reduce ...
Teach you how to find the prevention of spontaneous combustion of cars as soon as possible? Car spontaneous combustion peak period ...

The high temperature period of nearly 40 degrees nationwide has caused spontaneous combustion events to come together. These spontaneous combustion vehicles include old cars, new cars, and even new cars, and ...

Published on 2017-07-19 09:34 • 377 times read
Teach you how to find the prevention of spontaneous combustion of cars as soon as possible? Car spontaneous combustion peak period ...
The gearbox of the car is teething, so the harm to the car is so serious

The car has been in the Chinese market for some years, but there are still many failures. You are not very clear. Today I will introduce you to the car teething ...

Published on 2017-07-11 14:43 • 1128 reading
The gearbox of the car is teething, so the harm to the car is so serious
Looking at the friends who love cars, there are 6 taboos to remember when running new cars! ! ...

There will always be some slight flaws on the surface of the new transmission parts of the car, so that the parts are not tightly engaged and meshed with each other during operation, resulting in ...

Published on 2017-07-11 14:11 • 234 times read
Looking at the friends who love cars, there are 6 taboos to remember when running new cars! ! ...
Precautions that must be known in LED applications

LED has a unique advantage, but LED is a fragile semiconductor product, so we must be very careful when using LED products, now ...

Posted at 2012-10-31 10:22 • 414 views
Precautions that must be known in LED applications
Precautions for lead-free process implementation

Precautions for the implementation of lead-free process: 1. The use and storage of solder paste are strictly in accordance with the requirements of the supplier; 2. For lead-free components, we must ...

Posted at 2011-06-21 17:49 • 299 times read
Precautions for lead-free process implementation
Ten matters needing attention in high frequency operation

Pay attention to the ten precautions for high frequency operation. The machine itself needs to be equipped with a good contact grounding section.

Posted on 2011-06-19 09:53 • 496 views
Ten matters needing attention in high frequency operation
Manipulator removal steps and precautions

Remind the friends of manipulator users, when removing the manipulator, should pay attention to the following steps: 1. Turn off the power of the injection machine. 2. Turn off the robot flashlight ...

Published on 2010-07-28 09:51 • 399 times read
Manipulator removal steps and precautions
Note for students to use notebooks

Note for students to use notebooks As the prices of notebook computers continue to fall and become more popular, more and more students now have their own books. and...

Published on 2010-01-26 09:40 • 277 times read
Note for students to use notebooks
USB design considerations

USB Design Considerations Universal Serial Bus (USB) is like the ubiquitous RS-232 serial port in the past 20 years ...

Posted at 2009-04-22 18:45 • 715 views
USB design considerations
Novice design PCB considerations

Novice design PCB considerations 1. Single-sided pad: Do not use a filler block as a surface ...

Posted at 2009-01-18 13:15 • 667 views
Novice design PCB considerations
Matters needing attention and guidance for companies and enterprises

Precautions and guidance for companies and enterprises to participate in the exhibition, to enhance the company's popularity, to promote and promote new products has become an important ...

Published on 2008-11-18 15:34 • 1761 views
Matters needing attention and guidance for companies and enterprises
Precautions for using electron tubes

(1) The electronic tube should be in the rated lamp

Posted at 2006-04-17 23:31 • 414 views
Precautions for using electron tubes
Changhong CN-12 information and precautions

CN-12 movement bus adjustment and related maintenance A. Bus adjustment method CN ...

Posted at 2006-04-17 22:34 • 734 views
Changhong CN-12 information and precautions
Notes on the use of CMOS circuits

1) The working voltage of power CMOS integrated circuit is generally + 3V ~ + 18V, when the system is ...

Posted at 2006-04-16 23:32 • 355 views
Notes on the use of CMOS circuits
Novice design PCB considerations

1. Single-sided pads: Do not use filler blocks to serve as pads for surface-mount components, use single-sided ...

Posted at 2006-04-16 22:17 • 203 times read
Novice design PCB considerations
Precautions for Preservation and Use of Solder Paste

1. Saver ...

Posted at 2006-04-16 21:38 • 452 views
Precautions for Preservation and Use of Solder Paste
Precautions for using LCM

LCM uses ...

Posted at 2006-04-16 21:38 • 329 times read
Precautions for using LCM
Basic principles and precautions of printed circuit board design

...

Posted at 2006-04-16 21:33 • 240 views
Basic principles and precautions of printed circuit board design
Matters needing attention in PCB design

Designing a circuit as an electronic engineer is a necessary hard work, but the principle design ...

Posted at 2006-04-16 20:23 • 285 views
Matters needing attention in PCB design
var check_allow = "/d/Api/iscantalk.html"; var add_url = '/ d / article / write /'; function CheckLogin () {now_uid = ''; var ElecfansApi_checklogin = '/ webapi / passport / checklogin'; var logout_url = "{: U ('Login / logout')}"; var logout_url = 'http://bbs.elecfans.com/member.php?mod=logging&action=logout&refer=front'; $ .get (ElecfansApi_checklogin, function (data, textStatus) {if (data! = "") {EchoLoginInfo (data); CheckEmailInfo (data); data = $ .parseJSON (data); now_uid = data.uid; / * var login_content = 'write an article
'+ data.username +'
Quit '; * / var login_content =' write an article
'+ data.username +'
Set exit '; $ (' # login_area '). Html (login_content); var win_width = $ (window) .width (); if (win_width> 1000) {$ ("# mine"). MouseDelay (200) .hover (function () {$ ("# mymenu"). show ();}, function () {$ ("# mymenu"). hide ();});}} else {var content = 'Login Registration'; $ ('# login_area'). html (content); $ (". special-login"). click (function (e) {$ .tActivityLogin (); return false;});}});} $ (function () {// comment ------------------------------- var comment = $ ("# comment"); var comment_input = $ ("# comContent"); // Submit comment click event interaction $ ("# comSubmit2"). on ('click', function () {var content = comment_input.text (); // Empty input box comment_input. html (""). focus (); // Submit data to server $ .ajax ({url: '/plus/arcComment.php', data: {aid: $ ("# webID"). val (), dopost : 'apiPubComment', content: content}, type: 'post', dataType: 'json', success: function (data) {// Data format returned: if (data.status == "successed") {// Build temporary comment DOM var dom = ''; dom + = '
'; dom + =' '; dom + ='
'; dom + ='

'+ data.data.username +' '; dom + ='

'; dom + =' '+ content +' '; dom + =' '; dom + =' just now '; dom + =' '; dom + =' '; // insert a temporary comment to the list $ ("# comment ") .append (dom);} if (data.status ==" failed ") {// alert (data.msg); layer.msg (data.msg);}}}); return false;}); (function () {/ * * Insert single sign-on JS * / var setHost = 'https://passport.elecfans.com'; // Set domain name var script = document.createElement ('script'); script.type = 'text / javascript'; script.src = setHost + '/public/pc/js/t.passport.js'; script.setAttribute ("id", "sso_script"); script.setAttribute ("data-ssoSite", setHost); script.setAttribute ("data-ssoReferer", encodeURIComponent (location.href)); script.setAttribute ("data-ssoSiteid", "11"); var body = document.getElementsByTagName ("body"). item ( 0); body.appendChild (script);}) () / * * It is recommended to modify the style of the article without a picture * * / $ (". Article .thumb"). Each (function () {if ($ (this). find ('img'). attr ('src') == "") {$ (this) .find ('img'). remove (); $ (this) .parent (). css ('padding-left ',' 0px ');}}); / * Baidu share * / window._bd_share_config = {common: {bdText: '', // Custom share content bdDesc: '', // Custom share summary bdUrl: window.location.href, // Custom share URL address bdPic: ''} , share: [{"bdSize": 60, "bdCustomStyle": true}]} with (document) 0 [(getElementsByTagName ('head') [0] || body) .appendChild (createElement ('script')). src = 'http://bdimg.share.baidu.com/static/api/js/share.js?cdnversion=' + ~ (-new Date () / 36e5)]; var add_url = '/ d / article / write / '; // var check_allow = "{: U (' Api / iscantalk ')}"; var check_allow = "/ d / api / iscantalk"; var click_items_length = $ ('. art_click_count '). length; if ( click_items_length> 0) {var id_str = ''; $ ('. art_click_count'). each (function () {id_str + = $ (this) .attr ('data-id') + ',';}) // var url = "{: U ('Api / getclickbyids')}"; var url = "/ d / api / getclickbyids"; var id_data = 'id_str =' + id_str; $ .ajax ({url: url, data: id_data, type: 'post', dataType: 'json', success: function (re) {if (re.list.length> = 1) {var list = re.list; for (var i in list) {var t emp_id = list [i] ['id']; var temp_span = $ (". art_click_count [data-id =" + temp_id + "]") temp_span.html (list [i] ['click']);}} }})} $ ("# comContent"). click (function () {if (now_uid == '') {$ .tActivityLogin (); return false;}}) $ (function () {var follow_wrap = $ ( ".author-collect"); var now_uid = "{$ _super ['uid']}"; var face_src = "{$ _super ['uface']}"; var getFollowNum = $ (". followNum strong"). html (); // Follow $ (window) .on ('click', '.author-collect', function () {if (now_uid == '') {$ .tActivityLogin (); return false;} if ( $ (this) .attr ('id') == 'follow') {$ .post ('/ d / user / follow', {tuid: article_user_id}, function (data) {// Data format returned: if (data.status == "successed") {$ (". followNum strong"). html (++ getFollowNum); follow_wrap.html ('followed'). attr ('id', 'cancelFollow'). css ( 'background', '# 999'); var follow_user = ' '; $ (' # follow_list '). append (follow_user);} if (data.status == "failed") {alert (data.msg);}});} else {// Unfollow if ($ ( this) .attr ('id') == 'cancelFollow') {$ .post ('/ d / user / cancelFollow', {tuid: article_user_id}, function (data) {// Data format returned: if (data .status == "successed") {follow_wrap.html ('Follow'). attr ('id', 'follow'). css ('background', '# f90'); $ (". followNum strong"). html (-getFollowNum); $ ('# follow_list .face'). each (function () {var target_uid = $ (this) .attr ('data-uid'); if (target_uid == now_uid) {$ ( this) .remove ();}})} if (data.status == "failed") {alert (data.msg);}}); return false;}}});});}); / * var myface = "{$ _super ['uid'] | avatar}"; var myname = "{$ _super ['username']}"; var article_id = {$ article ['id']}; var article_user_id = {$ article ['mid']}; // Article author ID $ (function () {<notempty name = "clearnum"> // Reduce the number of reminders var count = parseInt ($ ("# noticeCount"). html ()); count = count-{$ clearnum}; $ ("# noticeCount"). html (count); if ( count

Pink Bluetooth Headset Adopt Bluetooth CSR 4.2 technology, built-in CVC 6.0 Noise Cancelling technology, Compatible Device Regardless your device system is IOS, Android, or WP, do not worry the system compatibility issues.. It can connect two mobile phones at the same time and ready to answer the incoming call of one phone at any time. We are the Top Chinese manufacturer of Pink Bluetooth Headset , and looking forward to cooperate with you!

Pink Bluetooth Headset

Pink Bluetooth Headset,Wireless Bluetooth Headphones,Headset In-Ear Earbuds,Pink Wireless Bluetooth Earphones

ShenDaDian(China) Digital Electronics Co.,Ltd , http://www.btearbuds.com

Posted on