In 2015, the succession of the company's Quanzhou Yangzhong Measurement and Control Co., Ltd.'s flap level gauge series won the bid for Taiyuan Yangmei Chemical Engineering Bidding Project. Among them, the company's flap level gauge series of high-temperature and high-pressure magnetic flap level gauges and low-temperature magnetic flap fluids The meter provides high-quality instrument automation system for the project to apply in process media such as process water, air, and flue gas, and the high temperature and high pressure magnetic flap level gauge work reaches 42Mpa, the medium temperature can reach 485°C, and the low temperature type magnetic flap liquid The meter medium temperature reached -70°C. Henan Cisco Measurement & Control Co., Ltd. and the development of this project are fully equipped with technical support and after-sales service for the instrument part.
Henan Cisco Measurement & Control Co., Ltd. won the bid in Yangmei Chemical's first project, and the satisfaction of providing quality products and services played a key role in this renewed cooperation. Henan Cisco Measurement & Control Technology Co., Ltd. provided flow measurement instruments to the project. The group should be a bit of: high measurement accuracy, easy installation, large range, and maintenance-free. Compared with other traditional throttling devices, there are clear advantages that can save more energy for the project.
Henan Cisco Measurement & Control Technology Co., Ltd. will use Wuhan and Beijing offices as its service platform to further provide high-quality, high-performance, maintenance-free and energy-saving process automation instrumentation and system engineering project solutions for coal chemical energy throughout the country.
Throttle device, flap level gauge, electromagnetic flowmeter, Siemens valve positioner, Siemens transmitter, Siemens level gauge, Siemens electromagnetic flowmeter, Siemens instrument throttle device manufacturer, throttle device selection, throttling Device working principle, orifice plate, nozzle, application, price.
Fiber optic adapter are used in fiber optic connection, the typical use is to provide a cable to cable fiber connection. People sometimes also name them to be mating sleeves and hybrid adaptors, mating sleeves means this fiber optic adapter is used to connect the same type fiber optic connectors, while hybrid adaptors are the fiber optic adaptor types used to connect different kinds of fiber optic connectors. YLTelecom`s fiber adapter provide reliable solution for fiber connections, single mode fiber optic adaptors and multimode fiber optic adaptors available on request. We adopt high quality raw materials and make these fiber optic adapters strictly according to international standard, this makes our fiber optic adaptors with high performance.
Fiber Optic Adapters FC, SC, ST, LC, MT-RJ, MU, E2000, FC/APC, SC/APC, LC/APC, E2000/APC, Simplex, Duplex, Quad, mating sleeves, hybrid fiber optic adapters, Single mode fiber optic adapters, multimode fiber optic adapters are all available.
Fiber optic adapters (also called couplers) are designed to connect two fiber optic cables together. They come in versions to connect single fibers together (simplex), two fibers together (duplex), or sometimes four fibers together (quad).
Adapters are designed for multimode or singlemode cables. The singlemode adapters offer more precise alignment of the tips of the connectors (ferrules). It is ok to use singlemode adapters to connect multimode cables, but you should not use multimode adapters to connect singlemode cables. This can cause misalignment of the small singlemode fibers and loss of signal strength (attenuation).
When connecting two multimode fibers, you should always make sure they are the same core diameter (50/125 or 62.5/125). A mismatch here will cause attenuation in one direction (where the larger fiber is transmitting light into the smaller fiber).
Fiber optic adapters are typically connecting cables with similiar connectors (SC to SC, LC to LC, etc.). Some adapters, called "hybrid", accept different types of connectors (ST to SC, LC to SC, etc.). When the connectors have differing ferrule sizes (1.25mm to 2.5mm), as found in LC to SC adapters, the adapters are significantly more expensive because of a more complicated design/manufacturing process.
Fiber Optic Adapter, Fiber Optic Cable Adapter, SC Fiber Optic Adapter, ST Fiber Optic Adapter, FC Fiber Optic Adapter
NINGBO YULIANG TELECOM MUNICATIONS EQUIPMENT CO.,LTD. , https://www.yltelecom.com