Intelligent curtain installation and debugging

Venetian blind intelligent control

Blinds can be adjusted and controlled according to the season, weather, and time. Specifically, by adjusting the angle of the slats or the overall movement of the louver, it is possible to avoid excessive sunlight, sunlight, and environmental protection. In general, the intelligent control of blinds on large glass windows often uses a 220V AC tubular motor and cooperates with a rectangular top slot and an octagonal tube to complete retracting, up and down and flipping of the blinds through special designs.

The main role of the smart shutter shade includes blocking radiant heat and effectively reducing direct sunlight.

Smart blinds have not only greatly saved indoor space, but also optimized people's lives to a large extent, and are therefore increasingly welcomed by people.

Rolling shutter intelligent control

The intelligent control of the roller blinds is relatively simple – just toggle the power switch. This is because under normal circumstances, the motor is directly installed in the corresponding aluminum alloy roll tube, which not only reduces the power transmission link and the volume of the curtain box, but also largely avoids the external influence on the motor and increases the reliability. At the same time, the corresponding tubular motor is installed in the roller shutter of the electric roller, and the rotation of the electric motor drives the roller to rotate, enabling it to open and close smoothly.

Electric roller blinds can be divided into outdoor shutters and indoor shutters. From the perspective of the shading effect, the former is more energy-efficient and more effective than the latter.

Curtain level control and facade control (note priority)

The level and facade of curtains are very important, because even if the curtains are selected well, if the layers and façade are handled improperly, the overall effect of the curtains will be affected. Therefore, the following points must be noted in the aspect control and elevation control:

First, consider the order. If it is a multi-layer curtain, it must pay attention to the order and priority, must not be installed inverted.

Second, consider the style. The level and the facade of the curtain must be chosen to match the fabric and style of the room.

For curtain level control and elevation control, priority should be given to the order, and the order should be kept in mind and not disturbed.

Remote control equipment installation and debugging

First of all, on the basis of drawing the line, installing the lifting clips on the intelligent curtain motor, it should be noted that if it is a concrete structure, then the expansion bolt must be added; then the motor is connected and connected to the track after wiring.

Finally adjust the motor stroke. At the end of the motor, there are gears and switching devices. When debugging, first position the locking plate to the knob 2, and push it into the knob 1. At this time, turn the knob 1 with your finger. If you hear the switch beeps, you will Knob 1 is gently pulled out (do not turn), so that the gear enters the engaged state, and the adjustment of knob 1 is completed; the knob 2 is then adjusted in the same way, and finally the rear cover is tightened with the screw to complete the installation and debugging.