About data center construction and energy saving differentiation at home and abroad
At present, due to differences in standards and requirements, there are also differences in the construction of data centers at home and abroad, especially on the issues of energy consumption and electricity charges. Why are the energy efficiency PUE values ​​of foreign data centers close to 1, and the domestic common data center PUEs at 2.2-3? between? Where is the problem?
Ms. Chen Yu, Sales Director of CommScope Greater China, said that this situation has a lot to do with the design of the data center. Many domestic data center design plans will invite foreign experts to refer to international standards for design specifications. Although they want to learn from some successful experiences of foreign data centers, they also reflect to some extent that many domestic design concepts cannot match. Forward-looking abroad - this puts new demands on the managers of our domestic data center operators. It is recommended to be forward-looking in design planning, not only in hardware investment, but also in software management. Consider the future needs.
Wu Jian, technical manager of CommScope Enterprise Solutions Greater China, pointed out that data center energy consumption is a very common problem. Everyone has been caring about and discussing the corresponding energy-saving measures. The biggest difference between domestic data centers and foreign data centers is that In design, the second is in management. The design is not optimized enough, the experience is not rich enough, but also because the talent is relatively lacking; we can spend a lot of money to buy the best switch, buy the best distribution facilities, but we are not willing to spend money to form a management process, let the special person go To manage this computer room and implement software management, we should use the process to manage, not just rely on people to manage, this is also a concept of intelligent management process management.
Integrated wiring and green energy saving
What is the relationship between integrated wiring and green energy saving? How to reflect? Wu Jian said that this has a relationship with design and management. The design must be forward-looking, because only forward-looking can save energy; management should be intelligent, saving space is energy-saving, refined management, using software to achieve data center The management of infrastructure is aimed at energy conservation.
Wu Jian told reporters that if the design is not good, half of it is withdrawn, or after the design is finished, it is used to find that it is a waste. The time is also a waste, and you continue to upgrade. To make an adjustment, this is not green and not environmentally friendly, so forward-looking is very important. What is the biggest bottom line for forward-looking? When selecting materials, when choosing copper cables, optical cables, and cabinets, consider what the future application is. If you don't think of it, you will definitely be restricted by future use. The most typical example of a forward-looking green energy saving is that if a link is, for example, a 10 Gigabit demand, and now only designed as a Gigabit, then there is a need in the future to replace 10 Gigabit with 10 Gigabit. Do we think it is the same? Ten Gigabits are equal to 10 Gigabit, but ten Gigabits replace one Gigabit. Do you think that it is a 10 Gigabit interface energy saving or ten Gigabit interfaces? Therefore, replacing a plurality of low-speed interfaces with a high-speed interface is itself an energy-saving bottom line, which is also said to be forward-looking.
Coupletech Co., Ltd. also supply Opto-mechanics products including optical mechanical adjustments racks, Pockels Cell holder ( Q-Switch holder), water-cooled modules ( water-cooled holder ), air-cooled modules ( air-cooled holder ), Crystal Mount, Mirror Mount ( Optical Mount ), ploarizer holder and other optics-related products but also according to the customer's need to design and assemble the relevant systems.
For matching our EO Q-Switch, EO modulator, Optical Crystal and mirror, we offer all kinds of Kinematic Mounts, e.g. one dimensional, two dimensional, three dimensional and four dimensional adjusting mount, post, rails, brackets, bases, carries and clamps. Cooling module is suitable for higher power pulsed Q-Switched laser. Coupletech is constantly adding new opto-mechanics to better serve our customers.
Opto-mechanics
Optical Stages,Optical Mount,Optical Rails,Pockels Cell Positioner,Crystal Holder,Rotation Kinematic Mounts
Coupletech Co., Ltd. , https://www.coupletech.com