“The LED power supply improvement solution needs to break the train of thought and improve and innovate through new ways.†He Zhenguang, chief engineer of Shenzhen Wonengda Technology Co., Ltd. (hereinafter referred to as 'Wonengda') introduced.
It is understood that 70% of the LED product failure rate applied to the lighting field appears on the power supply. Many solutions based on traditional ideas have not fundamentally solved the problem of LED power supply stability. Why not seek solutions from new ideas? Wonengda proposes a secondary post-constant current IC with a pre-stage PFC+ post-stage secondary constant current drive scheme, which can be used to develop ICs and drive powers that can be upgraded or lowered (input voltage can be higher or lower than LED operating voltage). A strong new circuit topology, trying to solve many technical problems of power supply through a new solution.
Alternative LED driver solutions
Wonengda is one of the few companies to enter the research and application of LED constant current source drive. It is very familiar with how to make LED drive power because it has been engaged in thyristor dimming power supply solution and adaptable power supply development. Better compatible with current application environment products.
It is understood that the current LED lighting market is mainly concentrated in two, one for the replacement market, simply to replace the original incandescent or halogen lamps with LED lamps; the other is a new installation, these markets can follow the LED The characteristics create new models, currently focused on new architectural lighting or large-scale renovation projects of government agencies.
As a cheap and large-scale 12V power supply for lighting quartz lamps, electronic transformers are still running around 2 billion. Since the output characteristics of the electronic transformer do not match the low-power LED lamps, problems such as no light, flicker, and insufficient output may occur. If the quartz lamp is completely replaced by an LED lamp, it will achieve good energy-saving effect, but in the process of replacement, if the electronic transformer is to be replaced, the cost is quite expensive, especially in Europe and America, the labor cost is almost the transformer. 10 times.
"We have combined multiple technologies and applied new circuit topologies and ASICs to solve this problem." He said that the power supply has been tested to be compatible with more than 95% of electronic transformers. The electronic transformer has a driving energy of not less than 20W, which is suitable for the high-power lamp driving of the AR111 type.
(unfinished)
For more details, please refer to the August issue of "High-tech LED-Technology and Applications"
Led Parking Light: the sound, infrared or microwave-controlled LED lighting, by voice, infrared or microwave sensor signals into electrical signals to the surrounding environment, according to changes in the electrical signal to adjust the brightness of LED lamps state, to achieve on-demand lighting Effect.
LED Parking Light Usually are composed by the LED light source module, a detection module, LED power modules, network modules, and shell composition.
LED Parking Light Housing assembly (bottom shell, face mask and cover other accessories);
Detector assembly (pyroelectric infrared sensor, Fresnel lenses and secondary line);
Controller assembly (intelligent controller, drive module);
Mingxue Optoelectronics Co.,Ltd. has apply the I S O 9 0 0 1: 2 0 0 8 international quality management system certificate, For led parking light, we apply the CE, RoHS and SAA certificate for our led lighting product.
Our R & D team can handle highly customized designs and offer OEM and ODM services.
We hope to set up a long-term partnership with you through our high quality products and our Sincere Service!
LED Parking Light
Led Parking Light,Led Shoebox Light,High Power Parking Light,Waterproof Parking Light
Shenzhen Mingxue Optoelectronics CO.,Ltd , https://www.mingxueled.com