Recently, it is reported that Apple Inc. is very interested in the new camera LED flash technology of Royal Philips Electronics Inc., has issued a large order for this new LED technology, and signed an exclusive agreement on this part. , officially incorporated into the product design, and may be installed on the iPhone 5 that was launched this time.
The typical LED flash is white, but the light in this new technology is changed to yellow and white. Photographs with white flash are often overexposed, but Philips' new "Smart LED Flash" is said to be smart. Detect ambient lighting to improve the quality of your photo effects.
However, Apple used to have its own technology but not used it. For example, the exclusive license of the new material “Liquidmetal†is made of metal such as zirconium, titanium, nickel and copper. The surface is as liquid as the liquid. The actual introduction of new materials has been around for a long time, but until now there is still no following.
Component Mounting And Soldering.The final step is to mount and solder the components. Both THT and SMT components are placed on the PCB by machines. THT components are most often soldered in an automated process called 'Wave Soldering'. This enables all components to be soldered simultaneously. Their legs are first cut near the board and slightly bent over to keep the component in place. The PCB is then moved over a wave of liquid flux, such that the bottom side strikes the flux. This removes any oxide from the metal surfaces. After heating the PCB it is similarly moved over a wave of melted solder. The solder attaches to the solder pads and component legs, and the soldering is complete.
The typical LED flash is white, but the light in this new technology is changed to yellow and white. Photographs with white flash are often overexposed, but Philips' new "Smart LED Flash" is said to be smart. Detect ambient lighting to improve the quality of your photo effects.
However, Apple used to have its own technology but not used it. For example, the exclusive license of the new material “Liquidmetal†is made of metal such as zirconium, titanium, nickel and copper. The surface is as liquid as the liquid. The actual introduction of new materials has been around for a long time, but until now there is still no following.
Component Mounting And Soldering.The final step is to mount and solder the components. Both THT and SMT components are placed on the PCB by machines. THT components are most often soldered in an automated process called 'Wave Soldering'. This enables all components to be soldered simultaneously. Their legs are first cut near the board and slightly bent over to keep the component in place. The PCB is then moved over a wave of liquid flux, such that the bottom side strikes the flux. This removes any oxide from the metal surfaces. After heating the PCB it is similarly moved over a wave of melted solder. The solder attaches to the solder pads and component legs, and the soldering is complete.
Component Mounting
Component Mounting,Custom Component Mounting,Metal Component Mounting,Mount Bracket Component
Orilind Limited Company , https://www.orilind.com